TGIC is a white particle or powder like heterocyclic epoxy compound with excellent heat and weather resistance, adhesion, and high-temperature performance.
Main purpose
1. Used as a crosslinking curing agent for pure polyester powder coatings (determined by acid value);
2. Used as a crosslinking curing agent for carboxyl containing polyacrylate (determined by acid value);
Keep the container sealed in a cool and dry warehouse. Avoid dust contact with eyes, skin and clothes, and operators should wash them thoroughly after operation. Net weight.: 25kg/ Bag
W-1040 polyester resin is an outdoor type resin. Polyester resin is a general term for polymer compounds formed by the condensation of binary alcohols, binary acids, polyols, and polybasic acids. Polyester resin is divided into saturated polyester resin and unsaturated polyester resin. Unsaturated polyester adhesive mainly consists of additives such as unsaturated polyester resin, pigments and fillers, initiators, etc. The adhesive has low viscosity, is easy to wet, and has good processability. The cured adhesive layer has high hardness, good transparency, high brightness, can be quickly cured under room temperature pressure, good heat resistance, and excellent electrical properties.
| W-1040 | 558 |
| TGIC | 42 |
| BaSO4 | 184 |
| TiO2 | 200 |
| 507 Flowing Agen | 10 |
| 103 Benzoin | 3 |
| 701Sensitizer | 3 |
Extruder Temperature of sleeve.℃ Screw temperature.℃ Rotational speed. rpm BUSS PLK46 50 115- 125 70
25 kg, packed in polyethylene plastic bags; Below 30℃, the shelf life is 1 year. Dry and ventilated, avoiding direct sunlight.
W-1023 polyester resin is an outdoor type resin. Polyester resin is a general term for polymer compounds formed by the condensation of binary alcohols, binary acids, polyols, and polybasic acids. Polyester resin is divided into saturated polyester resin and unsaturated polyester resin. Unsaturated polyester adhesive mainly consists of additives such as unsaturated polyester resin, pigments and fillers, initiators, etc. The adhesive has low viscosity, is easy to wet, and has good processability. The cured adhesive layer has high hardness, good transparency, high brightness, can be quickly cured under room temperature pressure, good heat resistance, and excellent electrical properties
| W-1018 | 552 |
| TGIC | 48 |
| BaSO4 | 184 |
| TiO2 | 200 |
| 507 Flowing Agen | 10 |
| 103 Benzoi | 3 |
| 701Sensitizer | 3 |
Extruder Temperature of sleeve.℃ Screw temperature.℃ Rotational speed. rpm BUSS PLK46 50 115- 125 70
25 kg, packed in polyethylene plastic bags; Below 30℃, the shelf life is 1 year. Dry and ventilated, avoiding direct sunlight
W-1018 polyester resin is an outdoor type resin. Polyester resin is a general term for polymer compounds formed by the condensation of binary alcohols, binary acids, polyols, and polybasic acids. Polyester resin is divided into saturated polyester resin and unsaturated polyester resin. Unsaturated polyester adhesive mainly consists of additives such as unsaturated polyester resin, pigments and fillers, initiators, etc. The adhesive has low viscosity, is easy to wet, and has good processability. The cured adhesive layer has high hardness, good transparency, high brightness, can be quickly cured under room temperature pressure, good heat resistance, and excellent electrical properties.
| W-1018 | 654 |
| TGIC | 49 |
| BaSO4 | 184 |
| TiO2 | 286 |
| 507 Flowing Ag | 10 |
| 103 Benzoin | 4 |
extruder Zone I temperature.℃ Zone II temperature.℃ Frequency. Hz SLJ-40 95- 105 105- 115 45
25 kg, packed in polyethylene plastic bags; Below 30℃, the shelf life is 1 year. Dry and ventilated, avoiding direct sunlight.
T-105 Hardener Agent can be cured with carboxylic polyester. It’s characteristic of low toxicity, no irritant to skin, good weather durability, etc. T-105 is suitable for the production of outdoor polyester powder coatings
2. For polyester with an acid value of 30-35mgKOH/g, the amount of TP105 is 5-6% of the polyester content,
3. The manufacturing and processing methods of HAA system and other systems' powders are basically the same, but in order to enhance the dispersibility of HAA, the extrusion temperature needs to be slightly higher, around 115-120 ℃.
4. The curing conditions are: 180 ℃/15min or 190 ℃/10-12min.
Keep it dry, away from high temperature and fire sources. This product is non-corrosive and not easy to burn. I ts toxicity is only 1/20 of TGIC, a low drug, does not pose harm to human body and the environment. After being used, please close the unused package immediately to prevent moisture absorption and deterioration Net weight.: 25kg/ Bag
This product is a modified compound of amide and silicon. M-3 hydrophilic silica can effectively improve the arrangement and affinity of metal powder, and at the same time, it can coat the powder, making the metal powder more metallic.
The addition amount is 0.5-1.5%
After binding, it can effectively improve the sense of powder metal and layering.
Keep dry and away from high temperature and fire sources. Composite kraft paper bag with LDPE film inside net weight: 20kg/ bag
ZN-5000 anti-corrosion additive is a zinc calcium strontium aluminum orthophosphate silicate hydrate.
chemical characterization Zinc calcium strontium aluminum orthophosphate silicate hydrate
Suitable for traditional resin systems, especially modern resin systems.
Keep dry and away from high temperature and fire Composite kraft paper bag packaging Net weight.: 25kg/ bag
W-98 modified micro-powder wax is a polyamide modified compound with good dispersibility and high hardness..
The recommended dosage for powder coatings is 0.3% -1%.
Keep dry and away from high temperature and fire sources. composite kraft paper bag packaging Net weight.: 20kg/ bag
W-52 Micropowder wax, the scientific name of which is high molecular weight polypropylene wax, has the characteristics of high melting point, low melting degree, good lubricity and dispersibility, and it has the advantages of high practicability nd wide application.
The recommended dosage for powder coating is 0.1%-0.5%.
Keep dry and away from high temperature and fire sources. composite kraft paper bag packaging Net weight.: 20kg/ bag
5068 compound type flowable agent is a compound additive, and its main components are leveling agent, brightener and benzoin compound. The surface of this product is full, shiny and smooth. One product of 5068 compound type flowable agent can replace three products in the product formula, thus saving labor and improving efficiency.
The recommended dosage is 4%-5%.
This product should be stored in a cool and dry place, immediately sealed after use, kept dry and away from high temperature and fire sources. composite kraft paper bag packaging Net weight.: 25kg/ bag
307 is a semi-physical, semi-chemical matting agent, consumed in a ratio of 1:2 to 1:2.3 with epoxy. This matting agent boasts excellent leveling and storage properties, produces a smooth surface, and is smokeless. This product can provide a matting effect of 4° or higher.
1.Usage and Dosage (Refer to the formula)
Gloss: 3-4°
|
Chemical Name |
Weight（g） |
|
Epoxy Resin 604 |
320 |
|
Polyester（4:6） |
260 |
|
Leveling 509 |
10 |
|
Barium sulfate |
400 |
|
Matting Agent 307 |
50 |
|
Piper oil |
5 |
|
Carbon Black |
6 |
|
Wax Powder |
3 |
The recommended addition range is 0.5-5%, with different addition amounts depending on the gloss level.
Polyethylene composite bag 25KG/ bag. This product is stored in a cool and dry place, and the validity period is 12 months at room temperature.
Silicon micropowder is a mica-associated Shi Ying ore, which is processed by multiple processes such as mineral processing, crushing, ball milling and airflow classification. The hardness of the product is 5-6, the specific gravity is 2.6-2.8, and it has the characteristics of low oil absorption, easy dispersion and anti-sedimentation. As a cost-effective mineral filler, silicon micropowder has made great contributions to wear resistance, corrosion resistance and hardness improvement of coatings and related products.
Keep dry and away from high temperature and fire sources. composite kraft paper bag packaging Net weight.: 25kg/ bag
9010 is a compound of modified amide and silicon. It can effectively improve the arrangement and affinity of metal powder, and play a coating effect on the powder to make the metal powder more metallic.
Add 0.5-1.5%; After binding, it can effectively improve the metallic and layered feel of the powder.
Keep it dry, away from high temperature and fire sources Composite kraft paper bag packaging Net weight.: 25kg/Bag
6100 Dispersing Agent is a kind of multifunctional micron grade organic silicone resin spherical powder, with insolubility, non-melting and excellent heat resistance and the best light transmittance and diffusion balance. It can be used as dispersing agent for pigment and anti-flocculating agent, improve the charging control and fluidity of toner, and improve the processability of various detergent and wax products. Applied it into plastics,rubber,cosmetics and other industries:Improve the dispersion of pigment and powder, effectively improve the lubricity and feel of the product. Applied it into Paint, ink industry, improve surface’s matte,smoothness and hydrophobicity,which bring people a cozy feeling. Suitable for coating and ink additive with high heat resistance and solubility; Scratch resistance for high - grade wood lacquer.
General addition: 0.5-2.0% Customers can adjust the addition flexibly according to the base material, practical use, material thickness, surface treatment and other needs.
Packing: 25KG/BAG Storage: Store in a cool and dry place to avoid moisture absorption. Close immediately after use and keep away
A9 Floating Agent of Acrylate is a special agent for the production of art powder coating, relative to the ordinary float agent according to a stronger three-dimensional sense. Its composition is divided into modified acrylic resin polymer, when the powder coating heating and melting and the surrounding components to form a large surface tension difference, resulting in the surface of the uneven orange lines or wrinkles. Users can produce patterns, floating flowers, wrinkles, hammer lines, orange lines and other patterns with strong three-dimensional sense according to the different usage and dosage. It is easy to disperse, add a small amount, according to the size of the amount can do different patterns, and economic, for ordinary flat powder has strong interference and pollution, powder base powder such as adding leveling agent can also pull up the pattern. A9 also overcomes the disadvantages of ordinary floating agents, such as poor powder recovery effect in the second application
Under normal circumstances, the dosage is 0.2 ~ 0.8% of the base powder, the user can determine according to the actual situation
Keep it dry, away from high temperature and fire sourComposite kraft paper bag packaging. Net weight.: 25kg/ Bag
458 Wear-resistant agent can be applied to powder coatings to produce excellent antiwear effect. Especially suitable for household appliances, IT equipment, audio equipment, office supplies, sports equipment and other industrial equipment.
Mixed with other components in the formula in a high-speed mixer, and then extruded by an extruder.
The dosage is 5-15% of the total weight of the formula.
Packed in kraft paper bags lined with polyethylene, each bag has a net weight of 20kg. Store in a cool and dry place to avoid moisture absorption. It should be closed immediately after use, away from fire sources. Based on our experience, the validity period of this product is at least two years at the storage temperature of-35℃.
936 Defoaming Agent is a transparent defoaming agent primarily composed of imported modified amide wax. This product is a finely micronized and refined material that disperses easily and can be added externally to formulations; it is suitable for use in a wide variety of powder coating systems. When incorporated into a formulation, it does not compromise the transparency of clear powder coatings, making it particularly well-suited for such applications. This product exhibits exceptional high-temperature resistance and outstanding anti-yellowing properties—remaining free of discoloration even under high-temperature baking conditions—while simultaneously delivering excellent defoaming performance. It is ideal for use in powder coating formulations with stringent degassing requirements, such as specialized coatings for alloy components including cast iron, cast aluminum, automotive wheels, and sanitary fixtures. Its application significantly enhances the product's surface appearance and leveling properties, effectively preventing defects such as pinholes.
936 Defoaming Agent is a transparent defoaming agent primarily composed of imported modified amide wax. This product is a finely micronized and refined material that disperses easily and can be added externally to formulations; it is suitable for use in a wide variety of powder coating systems. When incorporated into a formulation, it does not compromise the transparency of clear powder coatings, making it particularly well-suited for such applications. This product exhibits exceptional high-temperature resistance and outstanding anti-yellowing properties—remaining free of discoloration even under high-temperature baking conditions—while simultaneously delivering excellent defoaming performance. It is ideal for use in powder coating formulations with stringent degassing requirements, such as specialized coatings for alloy components including cast iron, cast aluminum, automotive wheels, and sanitary fixtures. Its application significantly enhances the product's surface appearance and leveling properties, effectively preventing defects such as pinholes.
(1) Packaged in composite neutral paper bags with an inner LDPE film lining; Net weight: 20 kg/bag. (2) Keep dry, and keep away from high temperatures and sources of ignition.
Resins or coatings may undergo oxidation and physical degradation of organic polymers due to high temperatures during production or curing, resulting in yellowing of the resin or film. This problem is frequently encountered in powder production and is not easily solved. Common anti-yellowing agents are not very effective in solving this problem. 608 Powder Anti-Yellowing Agent is used in powder resins or powder coatings to prevent polymer yellowing at high temperatures and to prevent film yellowing at room temperature.
Can be extruded together with other materials, and the amount added can be adjusted according to actual production needs. Generally, the usage rate is 0.1-0.5% of the total formulation.
Packing: 25KG/Bag Storage: Keep dry and away from high temperature and open flame
820 Anti-Caking Agent can effectively improve the looseness of powder, prevent powder clumping,and solve powder piling when thickly spraying.
Keep it dry, away from high temperature Composite kraft paper bag packaging, inner with LDPE film Net weight.: 25kg/ Bag
660 Electrostatic Charge Enhancing Agent for Spraying Gun is a frictional active masterbatch suitable for mixing, polyurethane or frictional active replacement systems. It contains 15% active substance, which greatly improves the electrification of powder coating, and effectively improves the dispersibility of additives in powder coating.
Addition amount: 1-2%
Standard packaging: 25KG/Bag. Store in a cool and dry place, and immediately seal after use. Keep away from fire sources
WX-1000 is a special dispersant used in powder coatings, which can improve the fluffiness of powder coatings and has a good anti-caking effect. It has excellent storage stability for powder coatings used in high temperature and high humidity environments. The special dispersant can improve the electrostatic properties of the powder, especially when using frictional electrostatic spraying, it can significantly improve the powder's transfer efficiency and solve dead corner problems, without affecting the glossiness of the powder coating.
The recommended dosage is generally 0.1-0.5%, and it is best to add during the sieving process of the finished product.
Packing: 25KG/BAG Storage: Keep dry and away from high temperature and open flames
469 is a novel adhesion promoter based on acrylate oligomers, containing a long-chain structure with special functional groups. It is suitable for secondary processing of galvanized steel and aluminum profiles; industrial paints; thin coatings on coils; anti-corrosion powders; spring powders; low-temperature powders; and multi-layer coatings. It improves the wettability between the coating and the substrate, promotes leveling, and enhances the adhesion between the coating and the substrate. It is suitable for oil-based, water-based, and powder coatings. It prevents coating cracking, improves the plasticity, flexibility, ductility, and impact resistance of the coating, and enhances the adhesion between the coating and the substrate, and between coatings. In powder coatings, it can be used in pure epoxy, epoxy polyester, pure polyester, PU, and HAA systems, including high-gloss, matte, and non-glossy powder systems. 469 Adhesion Promoter reduces system viscosity in the molten state; therefore, its use in artistic powder coatings may affect the pattern size. Adding this product to some physical systems may change the gloss, but it does not affect leveling or color. It does not affect the coating's weather resistance or storage stability.
This product can significantly improve the cold cracking resistance, impact resistance, bending resistance, and interlayer adhesion of powder coatings. It can be used for heavy-duty anti-corrosion powder coatings (above 400µm) and for powder coatings used in environments above -40°C; for cracking caused by incomplete curing in thick workpieces such as valves; and for improving the adhesion of powder coatings to substrates such as galvanized sheets and stainless steel with incomplete phosphating treatment.
469 Wetting and Adhesion Promoter is a novel accelerator based on modified acrylic compounds. Suitable for all types of powder coatings, it improves the wettability of the coating to the substrate, promotes leveling, enhances interlayer adhesion and delayed curing ability. It effectively solves problems such as paint film peeling, unclear transfer, and transfer surface detachment caused by surface tension inconsistencies in multi-layer coating and heat transfer printing. It is mixed with all other components in the formulation in a high-speed mixer and then extruded through an extruder.
The dosage is 0.5-1% of the total weight of the formulation.
(1) Composite bag, neutral plastic bag, 25KG/bag. (2) Store in a cool, dry place to avoid clumping. Seal immediately after use and keep away from fire.
This product is an ammonium salt-based polymer that exhibits excellent catalytic performance in powder coating applications, while simultaneously ensuring that leveling properties remain unaffected. Specifically, it effectively accelerates the curing process of powder coatings, thereby significantly reducing curing time and imparting superior mechanical properties.
Dosage: 0.2–1.5%
Packaging and Storage (1) Composite kraft paper bags; Net weight: 25 kg/bag. (2) Keep dry, and keep away from high temperatures and sources of ignition.
6050 anti-interference agent is a specially treated polymer salt. In powder coatings, it can be used as an additive for anti pollution purposes, effectively avoiding shrinkage, pinholes, pits, and surface loss caused by system incompatibility between outdoor powder and indoor powder conversion. This greatly saves color changing time, improves work efficiency, and reduces costs.
| W-6050 | 360 |
| E-12 | 240 |
| BaSO4 | 184 |
| TiO2 | 200 |
| 507 Flow agent | 10 |
| 103 Benzoi | 3 |
| 701 Sensitizer | 3 |
Curing condition ℃/min 180℃/15mins
25 kg polyethylene plastic bags; Below 30℃ The shelf life is 1 year. Dry and ventilated, avoiding direct sunligh
6055 anti-interference agent is a specially modified polymer additive, which is designed to be used in powder coating formulation, significantly improving the anti-interference ability of the formulation and improving and eliminating coating shrinkage.
Mixed with other components in a high-speed mixer and then extruded by an extruder.
The recommended dosage is 0.3-1.0% of the total weight of the formula.
Packing: 25KG/ piece, compound kraft paper bag. Storage method: Store in a cool and dry place to avoid moisture absorption, and close it immediately after use, away from fire sources.
605 Anti-Interference Agent is a specially treated acrylic polymer. In powder coatings, it serves as an additive for anti-fouling purposes and is suitable for various powder coating systems. It effectively prevents pinholes, craters, pits, and surface gloss loss caused by system immiscibility during the conversion between outdoor and indoor powder coatings. This significantly saves color change time, improves work efficiency, and reduces costs.
To ensure stable integration between different systems during the color change process of outdoor and indoor powder coatings, it is recommended to add 0.3%-0.5% of 605 anti-interference agent to the coating.
Keep it dry, away from high temperature and fire sources. Composite kraft paper bag packaging Net weight.: 25kg/ Bag
418 Surface Regulator Agent is a modified amide compound used for the micro- powder of solvent-free coatings. It can effectively adjust the fullness and fineness of the powder surface. It can also improve the dispersion of the pigment in dark coatings, thus promoting leveling.
Dosage: 0.3-0.8% of the total formulation
Packaging and Storage (1) Composite kraft paper bag, 25KG/bag. (2) Store in a cool, dry place. Seal immediately after use and keep away from fire.
WX600 Special Electrostatic Enhancing Agent is an alkyl compound that can effectively increase the electrostatic charge of powder particles during spray painting, thereby improving the powder adhesion rate. It can also effectively dissipate surface charges in a timely manner, thereby overcoming electrostatic shielding effects and solving the problem of dead angle powdering for some products
Internal addition amount: 0.1-0.5%
Standard packaging: 25KG/Bag. Store in a cool and dry place, and immediately seal after use. Keep away from fire sources
901 Defoaming Agent is a modified product of polyamide wax, surface modification of coating, sand aid, ink slip agent. 901 has functions of anti-foam, anti- coagulation and dispersion
Add to various powders for extrusion, with a dosage of 0.5-1.5%. The dosage depends on the experiment.
Keep it dry, away from high temperature and fire Composite kraft paper bag packaging Net weight.: 25kg/ Bag
Add to various powders for extrusion, with a dosage of 0.5-1.5%. The dosage depends on the experiment.Add to various powders for extrusion, with a dosage of 0.5-1.5%. The dosage depends on the experiment.This product is a mixed wax of polyethylene wax, polytetrafluoroethylene wax and other composite micro-powders, with an average particle size of 15 microns. It can be added externally or internally. After adding the powder coating, the wax base floats on the surface of the coating during the hot melt curing process, reducing the friction on the coating surface, thus improving the smoothness of the surface and playing the role of hardening and wear resistance.
It can be applied externally or extruded internally, which can be used in all kinds of powder coatings. In addition, the sample should be added to 0.2-0.8% of the total amount of the formula. The specific usage and dosage should be determined according to the experiment.
Packed in composite paper bags, keep dry and away from high temperature and fire sources. Net weight.: 20kg/ bag
518 Anti-fouling Leveling Agent is a new product that improves powder leveling and enhances powder surface fullness. It boasts excellent anti-fouling capabilities, overcoming the shortcomings of traditional formulations that use flow agents and brighteners, thereby improving powder production efficiency. This product eliminates the need for additional leveling and brighteners, improving product quality and simplifying the cumbersome processes of older formulations.
About 2% of the added amount in the formula.
Packed in composite paper bags, keep dry and away from high temperature and fire sources. Net weight.: 25kg/ bag
209 Sanding Agent is an amide-modified polytetrafluoroethylene designed specifically for powder coatings, which can provide a matte and wear-resistant sanding effect to the powder coating.
Addition amount: 0.1% -0.5% of the total formula for internal extrusion
Reference formula:
| epoxy resin | 260 |
| polyester resin | 260 |
| Sanding agent 209 | 35 |
| Bentonite | 15 |
| 508 leveling agent | 5 |
| Pigment filler | 450 |
Note: If a fine sanding effect is desired, it is recommended to screen with a 200 mesh sieve
201 Electrostatic Charge Enhancing Agent is an ammonium salt with charged functional groups. It can effectively increase the electrostatic charge of powder particles during spraying, thereby improving the powder deposition. During spraying, it can effectively discharge the surface charge in a timely manner, thereby overcoming the electrostatic shielding effect and making it easier to coat corners and inner surfaces. This product has been tested and proven to increase the powder deposition rate by 8-25%. It is particularly effective for varieties with low resin content such as sand and wrinkle textures, and can also effectively reduce the amount of silver powder used.
To solve the problem of powder deposition in dead corners, the recommended amount is 0.2-0.5% To significantly increase the powder deposition rate, the recommended amount is 0.2-0.8% To increase the pigment-to-resin ratio, the recommended mass ratio is above 1:1, while the powder deposition rate can be increased
Standard packaging: 25KG/bag. Store in a cool and dry place, and immediately seal after use. Keep away from fire sources
303 Silver Powder Orienting Agent is primarily used to increase the smoothness of powder coatings, improve the orientation of aluminum silver powder, and allow the metallic powder to disperse and float better, thereby significantly increasing the metallic feel of the coating and raising the gloss to over 150. This product is widely applicable to added metallic powders, such as aluminum silver powder, copper gold powder, and pearlescent pigments. It can eliminate dark spots on the surface caused by a top coat of clear varnish; ensure even distribution of silver powder; does not increase viscosity; improves the appearance of the front and sides; and prevents the formation of black edges.
It is extruded together with other materials at a temperature approximately 7°C higher than normal. After pulverization, metallic pigments are added.
The dosage is 0.3-1% of the total formula.
(1) Packaging: 25KG/piece, composite kraft paper bag. (2) Storage: This product should be stored in a cool and dry place. It should be sealed immediately after use and kept away from fire.
811 Matting Agent is a wax-free, resin-based additive matting agent designed for TGIC systems. It enables the formulation of outdoor-grade matting powders with a gloss level of 10–30%, making it suitable for use in a wide variety of outdoor powder coatings.
(1) Delivers lower gloss levels compared to similar products, making it ideal for achieving 10–30% matte finishes in outdoor applications;
(2) A wax-free matting additive compatible with various powder coating systems;
(3) Exhibits excellent stability, demonstrating minimal changes in gloss and color even under over-baking conditions.
Recommended dosage: 3–6%.
(1) Packaged in composite kraft paper bags; Net weight: 25 kg/bag. (2) Keep dry, and keep away from high temperatures and sources of ignition.
During the production or curing of resins and coatings, elevated temperatures can cause certain organic polymers to undergo oxidative degradation or suffer physical property damage, resulting in the yellowing of the resin or the cured film. This issue is a frequently encountered and persistent problem in powder manufacturing—one for which conventional anti-yellowing agents have proven largely ineffective. The 608 Antioxidant is specifically designed for use in powder resins and coatings to prevent high-molecular-weight polymers from yellowing under high-temperature conditions, while also inhibiting the yellowing of the cured film at room temperature.
Can be extruded together with other materials, and the amount added can be adjusted according to actual production needs. Generally, the usage rate is 0.2-0.5% of the total formulation.
Packaging and Storage (1) Packaged in composite kraft paper bags; Net weight: 25 kg/bag. (2) Keep dry, and keep away from high temperatures and sources of ignition.
W-12 hardening wax is a synthetic granular wax with high wear resistance, which can effectively improve the surface hardness of the coating film in powder coatings, especially in the external processing of metal pigment powder, and can fully play the role of wear resistance, scratch resistance and fingerprint removal. Using this product can improve the hardness of powder coating film by 1-3 hours compared with the corresponding varieties.
Keep dry and away from high temperature and fire sources. composite kraft paper barrel packaging Net weight: 25KG/ bag
106 Polymer Wax has a high molecular weight and a narrow particle size distribution, therefore it can effectively solve the problem of poor hand print resistance/hardness and powder agglomeration on the surface of aluminum (silver) powder plates. It can also provide excellent anti-scratch/wetting/dispersing effects in ordinary powder production, with a performance that is absolutely superior to that of ordinary low molecular weight polyethylene wax powder, while the price is comparable and the cost performance is relatively high.
0.3-0.8% addition
Standard packaging 25KG/bag This product should be stored in a cool and dry place, and immediately sealed after use, away from sources of ignition
W-1 Polytetrafluoroethylene Wax is a copolymer of polyethylene and polytetrafluoroethylene, which is a white ultra-fine powder with a smooth touch. It has excellent hardness, dispersibility, volatility, scratch resistance, and metal scratch resistance.
Generally controlled within 0.3-0.8% addition rat
The product should be stored in a cool and dry place with a shelf life of 12 months at room temperature. After use, it should be sealed immediately and kept away from fire. Packed in a composite bag of PTFE wax, 25KG/bag
This product regulates coating surface tension, homogenizes the coating, and promotes leveling, reducing orange peel and eliminating pinholes. The active ingredient is an acrylate polymer. Due to a special processing technique, this product is easily dispersed. It contains a wetting accelerator, providing excellent wetting properties. This product is silicone-free, non-staining, and does not affect recoating adhesion. This product is suitable for all powder coating systems.
Usage and Dosage: The dosage is 1% of the total powder weight. Please determine the specific dosage through experimentation.
Keep it dry, away from high temperature and fire s Composite kraft paper bag packaging Net weight.: 25kg/ Bag
A8 Floating Agent is a cost-effective external texture agent. Compared with commonly used floating agents in the market, A8 requires less dosage, has clearer patterns, and stronger three-dimensional effect. It is the latest research achievement of the company. (Note: this product has a relatively large pollution risk, please use it cautiously in the production process.)
Dosage and Usage: External addition. First prepare the base color powder, then mix 0.5-1.5% of the total powder amount of floating agent and the same proportion of copper or gold powder (aluminum powder or other pigments), and then mix evenly with the base color powder. The general dosage is 0.08-0.15%.
Keep in a well-ventilated and dry place at room temperature, away from direct sunlight and heat sources. Composite kraft paper bag packaging. Net weight.:25kg/ Bag
1. Good matting effect
2. Low cost
3. Does not turn yellow
4. No smoke
1. Usage and Dosage (Refer to the formula)
The amount added varies depending on the gloss level; the recommended amount is 0.5-5%.
Product gloss level: approximately 3°
|
Chemical Name |
Code |
weight（g） |
|
Epoxy Resin |
E-12 |
300 |
|
Polyester Resin（5:5） |
W-M 5050 |
300 |
|
Leveling Agent |
509 |
10 |
|
Barium nitride |
601 |
300 |
|
Matting Agent |
304 |
50 |
|
Sensitizer |
701 |
3 |
|
Black Carbon |
|
6 |
|
Wax Powder |
W-20 |
3 |
Notes: 1. The above formula design can also use 60/40 polyester or 50/50 polyester with a small amount of 70/30 polyester.
2. Formula adjustment direction: When the dosage of 304 in the formula is small (such as 2-3%), epoxy 304=2-2.5/1 curing ratio can be selected, which results in better leveling and lower gloss; When adding a large amount (4-4.5%) to the formula, the epoxy/304=2-1.5/1 curing ratio can be selected, resulting in a finer surface and lower gloss. According to the different dosage of 304 in the formula, users can choose the optimal curing ratio of epoxy 304 to adjust the gloss and surface.
This product should be stored in a cool and dry place with a shelf life of 12 months at room temperature. After being used, it should be immediately sealed and kept away from fire. Packaged in composite kraft paper bags, each bag weighs 25KG net.
103 Anti-Yellowing Benzoin is an alcohol ketone compound, also known as benzoin. It regulates the surface tension of the coating film by consuming oxygen in the bubbles, thereby eliminating defects such as pinholes and pores on the surface of fire-fighting paint films. 103 Anti-Yellowing Benzoin has good resistance to yellowing and will not turn yellow when baked at 200 degrees Celsius, making it suitable for various powder coatings.
Dosage: 0.2-0.5%
1.Keep it dry, away from high temperature and fire sources. Composite kraft paper bag packaging 2.Net weight.: 25kg/Bag
106 Polymer Wax has a high molecular weight and a narrow particle size distribution, therefore it can effectively solve the problem of poor hand print resistance/hardness and powder agglomeration on the surface of aluminum (silver) powder plates. It can also provide excellent anti-scratch/wetting/dispersing effects in ordinary powder production, with a performance that is absolutely superior to that of ordinary low molecular weight polyethylene wax powder, while the price is comparable and the cost performance is relatively high.
0.3-0.8% addition
Standard packaging 25KG/bag This product should be stored in a cool and dry place, and immediately sealed after use, away from sources of ignition
609 is a release agent (heat transfer ink) imported from abroad, mainly composed of acrylic organic compounds. 609 has excellent surface lubrication properties, which can effectively reduce the friction coefficient of the coating, give the surface a high degree of lubricity and fullness, and meet the needs of powder coating release. Proper addition of 609 will not affect the powder coating. Currently, 609 is the best release agent available domestically.
Used for heat transfer powder coating for super release effect. | Suggested addition amount: Add 609 into the powder along with other materials during extrusion. 609 is generally added at 0.8-1.5%. The addition amount can be adjusted according to the formulation. It is recommended to adjust the addition amount below 1.5%. There may be a certain temperature difference during construction. It is recommended to bake the powder at 200°C for 10-15 minutes, and bake the transfer paper at 140°CUsed for heat transfer powder coating for super release effect. | Suggested addition amount: Add 609 into the powder along with other materials during extrusion. 609 is generally added at 0.8-1.5%. The addition amount can be adjusted according to the formulation. It is recommended to adjust the addition amount below 1.5%. There may be a certain temperature difference during construction. It is recommended to bake the powder at 200°C for 10-15 minutes, and bake the transfer paper at 140°C
The product is packed in a kraft paper composite bag with a net weight of 25kg Store in a cool, dry place to avoid caking. After use, seal immediately and keep away from fire
301 Retardant Agent can be used as added or reactive flame retardant, widely used in electronic equipment plastic, copper lining lamination, circuit board and other materials flame retardant, but also can be used in linear polyester, polyamide, epoxy resin, polyurethane and other materials flame retardant treatment. In addition, it can also be used as optical material and flux flux. It has the characteristics of environmental protection, non-migration and permanent flame retardant.
Addition amount: 5-15%
25KG/Bag. This product should be stored in a cool and dry place, and should be sealed immediately after use and kept away from fire sources
Keep dry, away from high temperature and fire sources; Composite kraft paper bag 15kg/ bag.
1.The nano antibacterial agent has both the antibacterial effect of nano titanium dioxide under UV light and the antibacterial effect of nano silver without light source. 2.The nano antibacterial agent has fine and uniform particles. 3.The nano antibacterial agent does not volatilize, dissolve, or cause pollution to the environment. Antibacterial mechanism: The nano antibacterial agent releases positively charged silver ions at a controlled rate, which can adsorb and penetrate the cell wall of bacteria, destroy the electronic transfer system, respiratory system, and substance transfer system of microorganisms, and thus make the bacteria inactive. After entering the cell body, it can also react with the hydroxyl group of bacteria, causing the protein of bacteria to coagulate and destroying the activity of bacterial cell synthesis enzymes, making the cell lose the ability to divide and reproduce. Under the action of light, the oxidized silver ions can become catalytic active centers, activate the water and oxygen in the air, produce hydroxyl radicals and reactive oxygen ions with oxidation ability, destroy the reproduction ability of bacteria, and cause the bacteria to become inactive. When the bacteria lose their activity, the silver ions will be released from the bacterial body and repeat the antibacterial activity.
0.5-1%, specific usage can be determined according to customer requirements.
Store in a cool, dry place and keep it away from moistur 25kg/Bag